From PLANNED MAINTENANCE to EMERGENCY REPAIRS, Herc-U-Lift is prepared to keep your units on the job. On-site repairs are made by thoroughly trained technicians with vans equipped better than many service centers. If you need extensive repairs we can dispatch one of 19 delivery trucks to pick up your equipment. We offer:
Service Programs
Service
HUL logo




 

 

 

 

 

 

 

Carbon Monoxide Testing
Carbon monoxide (CO) testing provides consistant CO monitoring for each lift truck. Tail-pipe emissions and building CO testing are excellent tools to ensure safety around the workplace by monitoring the potentially harmful levels of carbon monoxide produced by lift trucks. For more information, contact our service department.

 

 

Planned Maintenance
This program is designed to help keep your equipment running at peak performance. Planned Maintenance is based on your truck's hourly usage and monitored by a computer program designed to keep track of your costs. This will provide you with an accurate HISTORY of your total cost of ownership of your equipment.

 

 

Full Maintenance
For one fixed monthly rate, all of your maintenance and repairs are covered. This CUSTOMIZED program will allow you to budget lift truck expenses while knowing that your trucks will be kept in top condition for maximum up time. This program is designed for one lift truck or a FLEET of lift trucks. We will work to develop a long-term strategy which focuses on immediate cost savings.






 

  • GAS, LP AND DIESEL EQUIPMENT ELECTRIC EQUIPMENT
    1. Check with machine operator about machine's functions.
    2. Blow out radiator core and clean machine with compressed air.
    3. Clean grease fittings and lubricate.
    4. Jack rear of truck and grease steer axle.
    5. Change engine oil and filter element.
    6. Check transmission and differential oil level; fill if necessary.
    7. Clean air cleaner; inspect hose and connections.
    8. Check mast assembly for proper adjustment and lubricate.
    9. Check battery; add water and clean terminals.
    10. Check hydraulic sump filter cap; clean or replace if necessary.
    11. Check hydraulic oil level; fill if necessary.
    12. Check and lubricate all connecting shafts and levers.
    13. Check steering gear box level; fill if necessary.
    14. Check power steering oil level; fill if necessary.
    15. Check power steering for proper adjustment.
    16. Check fuel, oil, water systems for leaks. Check radiator for proper coolant level.
    17. Inspect clutch pedal and linkage for proper adjustment.
    18. Inspect brake pedal linkage for proper adjustment.
    19. Check master cylinder; fill if necessary.
    20. Check PCV system.
    21. Clean grease fittings and lubricate.
    22. Check all necessary drive belts for proper tension.
    23. Check carburetor and accelerator linkage, including choke control.
    24. Check distributor points for adjustment and condition.
    25. Inspect spark plugs and ignition wiring.
    26. Inspect lift and tilt cylinders for leaks.
    27. Check tilt cylinder rod ends and anchors; adjust and tighten as necessary.
    28. Check fuel filter and lines.
    29. Operational check and physical inspection of machine.
    1. Check with machine operator about machine's functions
    2. Clean machine (compressed air).
    3. Clean grease fittings and lubricate.
    4. Jack rear of truck and grease steer axle.
    5. Check mast assembly for proper adjustment and lubricate.
    6. Check hydraulic sump filter cap; clean or replace if necessary.
    7. Check hydraulic oil level; fill if necessary.
    8. Check and lubricate all connecting shafts and levers.
    9. Check steering gear box level; fill if necessary.
    10. Check power steering for proper operation and adjustment.
    11. Check differential oil level; fill if necessary.
    12. Inspect lift and tilt cylinders for leaks.
    13. Inspect brake pedal linkage for proper adjustment.
    14. Check master cylinder; fill if necessary.
    15. Inspect battery; check water level.
    16. Check battery cables and receptacles.
    17. Check contractor assembly and all switches for proper operation.
    18. Check tilt cylinder rod ends and anchors; adjust and tighten as necessary.
    19. Operational check and physical inspection of machine.